Concrete Scanning with GPR and Detection Projects

Project in a manufacturing plant At a local manufacturing plant in Quebec, the contractor needs to saw the concrete to install new plumbing. Problem: There is no plan of existing plumbing...

Project description Problem: The structural engineer assigned to the project did not want to weaken the structural slab and asked the contractor to avoid the rebars when drilling. Solution: Georadar scan...

At the Claude-Robillard Sports Center in Montreal, a construction contractor needs to know the composition of the concrete structure.

An Ottawa excavation contractor needed to excavate 2 metres wide by 100 metres long to a depth of 2 metres to run new conduits.

Each concrete drilling can cause a disaster, injuries or serious problems for the plant if a conduit is damaged, especially since the plant has several 600 volt electrical conduits...

In the context of a school expansion in the Montreal area, an engineering firm wanted to ensure, at the plans and specifications stage, that the soil composition was correct...

Project description The problem: Environmental drilling scheduled to be carried out without plans regarding the electrical network. The solution: Georadar detection and markings to avoid damaging the electrical cables that supply...

Description of project The issue: An environmental company contacted us in order to identify heating cables before drilling to avoid damaging them. Solutions: Thanks to the using of the GPR, we...

Description of project The Problem: A general contractor contacted us to identify anchor points for a concrete structure to be attached to a concrete ramp. It was essential for them...

Project description In a hospital located in Sherbrooke, we have secured 85 areas for piercing. The plumber contacted us when the geriatric unit lost an electrical section. Underground detection with...

Project description In a park in Quebec, an excavation company contacts Info ex to detect all the underground conduits. Unfortunately, Info ex does not detect in private land. The excavator must...

Project description An Abitibi structural engineering firm needs to know where the reinforcement is located within the concrete beams and columns to carry out its study in a school. Problem: No...

Project description A company on the South Shore needs to know where the frame is located, within concrete, in order to carry out its project. Problem: There is no data available...

Project description Scan Plus partners with environmental engineering companies to detect underground storage tanks or to locate conduits in the ground before taking core samples to prevent breakage.

Project description A specialized plumbing contractor contacted Scan Plus to locate and detect the various ducts in the slab prior to their openings and sawing. Our detections were able to...

Project description Problem: There is a need for drilling and concrete sawing on a renovation project site, in a factory located in Sherbrooke. The contractor is afraid for his team...

Project description Problem: An environmental company in Quebec City wants to know whether the underground oil tank was removed by the former owner. Solution: The Ground Penetrating Radar (GPR) and radio...

Project description Problem: Drilling needs to be done inside a residential tower in Sherbrooke. There are electrical conduits and drainage throughout the slab. The condominium trustee does not have a...

Project description Problem: Geotechnical drilling must be done inside a factory in Montreal. There are electrical conduits and drainage throughout the slab. The customer who owns the plant does not...

Project description Problem: an engineer wants to know the position and corrosion level of rebars, along with the welding points, to conduct a study in the Sherbrooke region, in relation...

Project description The problem: there are electrical conduits, aqueducts and gas in a private field and the company does not want to damage these conduits. There is no existing network...

Project description A plumbing company; a client of ours located in Montreal, needs to drill in the concrete. The problem: There are conduits that the concrete scanning company before us did...

Project description An industrial customer in Quebec City needs to anchor 4″ screws in concrete. The problem: there are electrical conduits and heating cables less than 2″ deep. The solution: GPR detection...